Technical characteristics of SD203TM-26(7M)

Parameter Name	SD203TM-26(7M)
Number of Channels	2
Data exchange	through LPT1 or LPT2 ports in EPP mode or USB
Operation mode	Oscilloscope mode
Maximal Sampling Rate	7000 kHz
Bandwidth of channel	(0÷26) GHz
Input impedance	50 Ohm
DC offset range	-1000÷1000 (adjustable with step 1 mV)
Sensitivity Range	1÷200 mV/div (adjustable with step 1 mV/div)
Dynamic range	±1000 mV
Noise factor (RMS)	1.6 mV
Number of averaging	4096(adjustable)
Accuracy of amplitude measurements	(Ux /1000mV+40mV/Ux) %
Zero Drift of Y-axis	± 0.3 mV
Time Base	(0.002 ÷ 6) ns/div @ Sampling Rate 7 MHz (0.002 ÷ 8.2) ns/div @ Sampling Rate 6 MHz (0.002 ÷; 9.4) ns/div @ Sampling Rate 5 MHz (adjustable with step 0.002 ns/div)
Fine Delay	0 ÷ 4 ns (adjustment range) 0.01 ns (step)
Coarse Delay:	Adjustment range (step 4 ns): 0 ÷ 60 ns @ Sampling Rate 7 MHz 0 ÷ 82 ns @ Sampling Rate 6 MHz 0 ÷ 94 ns @ Sampling Rate 5 MHz
Number of samples in time window	4 ÷ 4096(adjustable)
Short-time triggering instability (Jitter) in TDR Mode with test Pulse Generator Head	8.0 ps (2.0 ps RMS) @ Fine Delay 0÷1 ns
Accuracy of time measurements	3ps +2%Tx (5ps/div<Scale<100 ps/div) 5ps +0,1%Tx (100ps/div<Scale<1 ns/div) 5ps +0,1%Tx (100ps/div<Scale<1 ns/div) 10ps +0,1%Tx (Scale>1 ns/div)
RF connectors	SMA
System time drift	< 15 ps/hour (with Generator)
Spectrum stability	1÷2% (@ 26 GHz) (with Pulse Generator Head GZ1117DN25)
Temperature range	(+5÷ +35) °C
Power Supply	AC main (90÷260) V; (50÷ 60)Hz

For quote and supportplease SEND REQUEST